Filter
Top Products
13
7. When the connection is established between the
Dolphin terminal and the eBase, the terminal plays a
sound, and the COMM LED on the eBase lights
green. The connection icon in the Dolphin’s
navigation bar changes from to .
8. Upon connection, the Dolphin terminal shares the
eBase IP address. This IP address can be used by
any application on the Dolphin terminal.
9. When you disable RASMan or remove the terminal
from the eBase, the terminal plays a sound and the
disconnected icon appears in the Navigation
bar. The COMM LED on the ebase lights orange.
Note: A soft or hard reset of the terminal disables RASMan and
the Ethernet connection. Tap Start > Power Tools >
RASMan to restart the program and restore the
connection.
To start RASMan automatically after each soft or hard
reset, enable the RASMan Program section of the
Autorun.exm file (see AutoRun RASMan on page 15).
Troubleshooting
If the COMM LED lights red while browsing a web page,
refresh the page and RASMan will automatically
reconnect and the LED light green.
x
x