Filter
Top Products
14
Displaying the eBase and Terminal IP Address
Once the Dolphin terminal has be successfully connected
to the eBase, the terminal shares the eBase IP address.
1. Tap
Start > Power Tools > Network Utilities >
IPConfig
.
2. On the Input tab, tap the
Display full configuration
button.
3. The Dolphin terminal retrieves and displays the IP
configuration for the entire terminal and eBase.
Locate the
IpAddress
field in the IP configuration list.
DeviceConfig and RASMan Settings
If your application requires frequent connecting and
docking/undocking to the Ethernet, and USB
communication is not required, Honeywell recommends
modifying the Dolphin's DeviceConfig.exm and
RASMan.exm files to the following settings.
Modifying the DeviceConfig.exm ActiveSync
Setting
1. Tap
Start > Power Tools > EZConfig Utilities >
DeviceConfig
.
2. Locate
ActiveSync
under the
Connections
list.
3. Tap and hold the stylus on
ActiveSync
.
4. Select
Enable
from the pop-up menu.
5. Tap twice on
AutoConnect
in the Key column.
6. Select
OFF
from the value pull down menu. Tap
OK
on the Navigation bar.