Filter
Top Products
22
2. Locate the reset button on the bottom of the eBase.
3. Push in and hold down the reset button.
4. While holding down the reset button, plug in the
power cable.
5. Wait 15 seconds, and then release the button.
Note: When the factory defaults are restored, the password
reverts to the default password, <Dolphin>.
Upgrading the eBase Firmware
To upgrade the firmware on the 9700 eBase, you will first
need a computer running TFTP server software that
stores the firmware upgrade file.
Using the Cradle Manager to Upgrade the
eBase Firmware
1. Verify the eBase is connected to Ethernet network.
Note: Firmware upgrades for the eBase do not require a
Dolphin terminal be installed in the eBase.
Reset Button