Filter
Top Products
21
8. The connection icon in the Dolphin’s navigation bar
changes from to it indicate a successful
connection. The eBase can now transfer data
between the terminal and the host device.
Switching from an Ethernet to USB
ActiveSync Connection
If you have trouble switching from Ethernet to USB
ActiveSync mode, then RASMan may have disabled
ActiveSync. Take the following steps to recover
ActiveSync.
1. Remove the Dolphin terminal from the eBase.
2. Connect the USB cable to the host workstation and
then the eBase.
3. On the Dolphin terminal, tap
Start > ActiveSync >
Menu > Connections...
4. Select the check box next to,
“Synchronize all host
workstation's using this connection.”
5. Choose
USB
from the drop down menu.
6. Tap
OK
on the Navigation bar to exit the ActiveSync
applet.
7. Insert the terminal in the terminal well. ActiveSync
automatically initializes synchronization.
Restoring the eBase Factory Defaults
To return the eBase to the factory defaults:
1. Unplug the power cable on the eBase.
x