Filter
Top Products
20
USB Communication
Dolphin terminal’s support USB communication out of the
box. The eBase also supports USB communications using
the USB port located on the back panel of the eBase. The
eBase acts as a USB device by interfacing the USB
signals of the Dolphin terminal to the USB of the host
workstation. Using a standard USB cable, the ebase’s
USB interface allows the Dolphin terminal to communicate
with a host workstation.
Setting Up and Connecting the Dolphin
Terminal to the eBase
1. Plug the power cord into the power adapter.
2. Plug the power connector cable into the power
connector on the back of the eBase.
3. Plug the A/C power cord into a standard wall outlet.
The COMM LED flashes red.
4. Plug the USB communication cable into the USB port
on the back of the eBase.
Note: The Dolphin terminal should always be removed
from the eBase when connecting or disconnecting
the USB cable.
5. Connect the other end of the USB cable to the host
workstation. The COMM LED changes to steady
green.
6. Insert the Dolphin terminal in the eBase terminal well.
The DOCK LED illuminates green.
7. The Dolphin terminal activates and automatically
opens ActiveSync to establish a connection. The
COMM LED flashes green.