Filter
Top Products
23
2. Connect the host workstation Ethernet cable to a port
on the same Ethernet subnet as the eBase. If the
eBase is connected to a hub (or router), connect the
host workstation to an available port on the same
hub.
3. On your host workstation, open the web browser.
4. In the Address line, type the IP address assigned to
the ebase, see Displaying the eBase and Terminal IP
Address on page 14. Press
ENTER
.
5. Enter the user name <
Admin>
and default login
password <Dolphin>.
Note: The user name and password are case-sensitive. For
information on how to change the password, see page 18.
6. The Cradle Manager window appears.
7. In the Cradle Manager window, check the box next to
Firmware upgrade.