Filter
Top Products
25
Mounting
Set the eBase on a dry, stable surface, such as a desktop
or workbench near an electrical outlet. Be sure to provide
enough workspace with good lighting for the user to view
and operate the Dolphin terminal while it is in the eBase.
When choosing a location, bear in mind that:
• the mounting location must allow users easy access to
the Auxiliary Battery Well, and
• the Ethernet and USB ports as well as the power jack
face straight out of the rear panel, and you will most
likely want easy access to them in the future.
Installation Hardware
Screw: 3/16 in. dia x 5/8 in. long pan head screw
Washer: 1/2 in. OD x 7/32 in. ID x 3/64 in. thick
Nut: 3/16 in. dia
Using the DIN Rail
The DIN rail slot (7.5 X 35 mm) may be mounted on the
bottom to allow for secure desk attachment of the unit if
desired.
1. Slide the DIN rail
slot along the
bottom panel.
2. Then, using the
appropriate nuts
and bolts, secure
the DIN rail to the
desk or flat surface.
DIN Rail
(7.5 X 35 mm)