Filter
Top Products
7
USB Port
This USB Port is full-speed and 2.0 compliant. Using
a USB cable, you can connect the eBase to a USB
compliant device to facilitate USB communication to
and from the terminal. USB communication occurs
through Microsoft ActiveSync (v4.5 or higher) or
Microsoft Windows Mobile Device Center (WMDC)
depending on the host workstation’s operating
system. When the terminal is seated in the terminal
well, it is connected to the peripheral device via the
eBase.
Note: ActiveSync on your Dolphin terminal works with
WMDC on host workstations running Windows Vista
or Windows 7 and with ActiveSync on host
workstations running Windows XP. For detailed
information on ActiveSync and WMDC visit
Microsoft's Windows Mobile Web site.
RJ45 Ethernet Port
Use a standard CAT-5 Ethernet cable; you can
connect the ebase to an Ethernet-compliant device
to facilitate Ethernet communication to and from the
terminal.
DC Power Jack
Use the power cable from Honeywell that comes with
the ebase to supply power to this power jack. For
more information, see Power on page 9.
This color and status means…
Green Flashing Network activity
Orange Solid Ethernet link active