Filter
Top Products
User Manual
Aolynk DR814Q ADSL2+ Broadband Router 3 Getting Started
8
3 Getting Started
tion pages for configurations and
management. You can configure the DR814Q as needed. This chapter guides you to
3.1 Prer
lt-in Web pages, you must configure your PC
I. stem requirement
t Internet Explorer 5.5, Netscape 6.0 or later)
yed
II.
he default IP address and subnet mask of the
8.1.1 and 255.255.255.0 respectively. Refer to
– TCP/IP Protocol”.
III.
e the proxy
s] window.
nnections] tab and click <LAN settings…>.
e Use a proxy server option is not selected.
IV. Import
1) the dialing software
y the operation system or other
client dialing software is not needed and can be uninstalled.
The DR814Q offers a series of Web-based configura
be familiar with the Web-based configuration pages.
equisite Tasks for Configuration
To configure the DR814Q through its bui
as the following.
Sy s on your PC
z A Web browser (Microsof
z TCP/IP protocol emplo
IP address of your PC
Before accessing Web-based configuration pages of the DR814Q, you need to
configure your PC as obtaining IP address and DNS server address automatically. If
you assign a static IP address for the PC instead, note to assign an IP address in the
same network segment as the DR814Q. T
DR814Q Ethernet port are 192.16
section 7 “Appendix
No proxy server
If your PC uses the proxy server to access the Internet, you must disabl
service.
1) Choose [Tool/Internet options] to open the [Internet option
2) Click the [Co
3) Make sure th
ant
The DR814Q provides the automatic dialing function, thus
(PPPoE dialing software, for example) provided b