Filter
Top Products
User Manual
Aolynk DR814Q ADSL2+ Broadband Router 4 Web-based Basic Configuration
27
4.4.1 Restarting/Restoring Factory Default Settings
This page allows you to restart the DR814Q, or reset all configurations to factory default
settings.
Figure 4-16 Restart page
To restart the DR814Q, click <Restart>.
To reset all configurations to the factory default settings, select the [Reset to factory
default settings] check box and click <Restart>.
Note:
Another method to restore the factory default settings is to press the Reset button on
the rear panel of the DR814Q and hold it down for about five seconds.
4.4.2 Password
Click the [Password] tab of the device setup page to enter the corresponding page. You
can access the Web-based configuration page of DR814Q via two usernames: admin
and user. The administrator has the maximum rights while the common user can only
access part of the configuration pages. Only the administrator can enter the password
setting page to change the login passwords for the two users. The common user can
only change its own password.