Filter
Top Products
HG232f 300Mbps Wireless Router
User Guide
3 Configuration of Internet Access Parameters
3-1
3 Configuration of Internet Access Parameters
3.1 Logging In to the Web-based Configuration Utility
Most of the router parameters are pre-set before delivery to meet common home
application scenarios. To check the router's working status or configure certain advanced
network functions, use the web-based configuration utility.
To log in to the web-based configuration utility:
Step 1
Set the network connection of your computer to obtain an IP address automatically.
By default, the Dynamic Host Configuration Protocol (DHCP) function is enabled. The
router then assigns an IP address to your computer automatically.
The configuration procedure on the computer running the Windows 7 operating
system is as follows:
1. Choose start > Control Panel > Network and Internet > Network and Sharing
Center > Change adapter settings.
2. Right-click Local Area Connection and choose Properties.
3. Double-click Internet Protocol Version 4 (TCP/IPv4).