Filter
Top Products
HX200/HX200L-2000/HX300/HX300L/HX400
1-6
1.4.2. Safety Nameplate
Identification plates, warning label and safety symbols are attached to the robot and
to the inside and outside of control panel. The designation labels and cable Mark for
wire harness between the robot and control panel, and the cables inside/outside of
control panel are provided.
All of these plates, labels, symbols and marks constitute safety-relevant parts of the
robot and the control panel. They must remain attached to the robot manipulator and
control panel at their clearly visible positions all the time for the safety and their full
performance.
The painted markings on the floor and signs indicating dangerous zones must be
clearly distinguished in form, color, and style from other markings on the machine
near the robot system or inside the plant facilities where the robot system is installed.
It is forbidden to remove, cover, or paint over by way of spoiling the
clearly visible identification plates, warning labels, safety symbols,
designation labels and cable marks.