Filter
Top Products
POST Error Code FRU/Action
210XXX1
External bus, size unknown.
1. SCSI Hard Disk Drive
2. SCSI Adapter
3. SCSI Cable
4. SCSI ID Switch
(on some models)
Tape Drive amber LED
remains on.
1. Tape Drive
2. SCSI Cable (internal)
3. SCSI Adapter
Tape Drive green “in use”
LED fails to come on.
1. Tape Drive
2. SCSI Adapter
3. SCSI Cable (internal)
SCSI Cable (external)
Tape automatically ejected
from drive.
1. Tape Cassette
2. Drive
SCSI ID on rotary switch
does not match SCSI ID
set in configuration.
Verify drive switches
inside cover are set to
zero.
1. Rotary Switch Circuit
Board
2. Circuit Board Cable
3. Tape Drive
Tape sticks/breaks in
drive.
Verify that the tapes used
meet ANSI standard X3B5.
1. Tape Cassette
212XX 1. SCSI Printer
2. Printer Cable
213XX 1. SCSI Processor
214XX 1. WORM Drive
215XXXC
215XXXD
215XXXE
215XXXU
If an external device, and
power-on LED is off, check
external voltages.
1. CD-ROM Drive I
CD-ROM Drive II
Enhanced CD-ROM
Drive II
Any CD-ROM Drive
2. SCSI Cable
3. SCSI Adapter
216XX 1. Scanner
217XX
If an external device, and
power-on LED is off, check
external voltages.
1. Rewritable Optical
Drive
2. SCSI Adapter
3. SCSI Cable
218XX
Check for multi CD
tray, or juke box.
1. Changer
219XX 1. SCSI
Communications
Device
24201Y0, 24210Y0
Be sure wrap plug is
attached.
1. ISDN/2 Adapter
2. ISDN/2 Wrap Plug
3. ISDN/2
Communications
Cable
IntelliStation - 6866 201