Filter
Top Products
POST Error Code FRU/Action
180X, 188X
PCI configuration or
resource error.
1. Run Setup and verify
PCI/ISA configuration
settings.
2. If necessary, set ISA
adapters to “Not
available” to allow PCI
adapters to properly
configure.
3. Remove any suspect
ISA adapters.
4. Rerun diagnostics.
5. PCI Adapter
1962
Boot sequence error.
1. Possible hard disk
drive problem, see
“Hard disk drive boot
error” on page 140.
209X 1. Diskette Drive
2. Diskette Cable
3. 16-bit AT Fast SCSI
Adapter
20XX
Not listed above
1. BSC Adapter
21XX 1. SCSI Device
2. 16-bit AT Fast SCSI
Adapter
3. Alternate BSC Adapter
2401, 2402
If screen colors change.
1. Display
2401, 2402
If screen colors are OK.
1. System Board
2. Display
2409 1. Display
2410 1. System Board
2. Display
2462
Video memory configuration
error.
1. Check cable
connections.
2. Run Setup and verify
video configuration
settings.
3. Video Memory
Modules
4. Video Adapter
(if installed)
5. System Board
3015, 3040
Check for missing wrap
or terminator plug on the
adapter.
1. Network Attached?
2. LF Translator
3. Cable Problem
4. PC Network Adapter
30XX 1. PC Network Adapter
2. LF Translator
3. Cable Problem?
IntelliStation - 6866 195