Filter
Top Products
DB2 software will be installed in the /usr/opt/db2_08_01 (AIX) or /opt/IBM/db2/v8.1
(Linux) directory.
2. For 6.2.0, the HPSS software and documentation should already be installed according to the
installation step in section 5.3.1.1. Installing from CD will be an option starting in 6.2.1.
3. For 6.2.0, the hpssuser utility should be used to package the HTML files for delivery to each
hpssgui machine or to a common shared file system on a remote node. Installing from CD
will be an option starting in 6.2.1.
To provide the SSM Help facility, the HTML files from the HPSS
documentation must be accessible from the node where the hpssgui runs.
The hpssuser utility may be used to package the HTML files for delivery to
each hpssgui machine or to a common shared file system. Installation of the HPSS
documentation elsewhere is optional.
4. Click the 'Install Software' button to install the selected software/options on the system.
5. If the installation was a success, you should see the following message in the command
output window:
## run command exited with status 0
Click the 'Done' button on the Command Output window to close the window.
5.3.1.3. Set Up DB2 Permanent License
This section describes the procedure to create the DB2 permanent license and to specify the number
of processors licensed for the root subsystem machine.
To create a permanent DB2 license, issue the following commands:
HPSS Installation Guide July 2008
Release 6.2 (Revision 2.0) 142