Filter
Top Products
5.3.2. Install and Configure HPSS – Secondary Subsystem Machine
For the secondary subsystem machine, the following configuration steps must be performed:
• Pre-installation Configuration
• Install HPSS documentation and DB2
• Set up DB2 permanent license
• Install configuration bundle
• Configure Security Services
• Configure DB2
• Configure Other Services
The following sections describe the procedure to perform the above steps.
5.3.2.1. Pre-Installation Configuration
Before configuring HPSS, you will need to perform the following steps to setup the appropriate
configuration directories and files on the machine where the secondary subsystem servers will run:
1. Install the HPSS software on the subsystem server node. For AIX, an LPP image or tar file
will be provided in HPSS release 6.2.0. For Linux, an RPM package or tar file will be
provided in HPSS release 6.2.0 Invoke the mkhpss utility from the /opt/hpss/bin (default
location) directory. mkhpss will bring up the following screen:
2. From the "Secondary Subsystem Machine" submenu, click on the 'Pre-Install Config' icon in
the left panel. mkhpss will display the following screen:
HPSS Installation Guide July 2008
Release 6.2 (Revision 2.0) 160