6.3.11. Pre-Conversion System Check
•
It is strongly recommended that a test conversion be performed prior to running the
conversion on a production system. See Section 184: Testing the Metadata Conversion
on page 184
•
Ensure that the DB2 database has been configured prior to the conversion
•
Conversion output should be captured and any problems corrected before continuing. See
Section 6.2.7: Capturing the Metadata Conversion Output on page 185 for information
on capturing and viewing the conversion output
See Section 6.2.6: Estimating the Metadata Conversion Time on page 184 to estimate the running
time for the HPSS 4.5 conversion utilities. See Section 5.7: Tune DB2 on page 171 for DB2 Tuning
needed prior to performing the conversions (for 4.5 upgrades only).
HPSS Installation Guide July 2008
Release 6.2 (Revision 2.0) 202