IBM L2/3 Switch User Manual


 
136 Nortel Networks L2/3 Ethernet Switch Module for IBM Eserver BladeCenter
Cisco commands to verify OSPF
The following commands are in addition to the Cisco commands used for RIP (see
Example 7-39):
sh ip ospf neighbor Lists the OSPF neighbors of the current switch.
sh ip ospf database Provides a dump of the OSPF topology database, which includes
all switches in the same area as the one where the command is
issued.
Example 7-39 Cisco commands to verify OSPF
sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 9.42.171.3 to network 0.0.0.0
9.0.0.0/24 is subnetted, 1 subnets
C 9.42.171.0 is directly connected, GigabitEthernet0/24
10.0.0.0/24 is subnetted, 7 subnets
O 10.10.0.0 [110/2] via 10.46.0.244, 00:25:13, Vlan46
[110/2] via 10.36.0.243, 00:25:13, Vlan36
O 10.20.0.0 [110/2] via 10.46.0.244, 00:25:13, Vlan46
[110/2] via 10.36.0.243, 00:25:13, Vlan36
C 10.46.0.0 is directly connected, Vlan46
O 10.45.0.0 [110/2] via 10.46.0.244, 00:25:13, Vlan46
O 10.35.0.0 [110/2] via 10.36.0.243, 00:25:13, Vlan36
C 10.36.0.0 is directly connected, Vlan36
C 10.99.0.0 is directly connected, GigabitEthernet0/24
S* 0.0.0.0/0 [1/0] via 9.42.171.3
Core2#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
9.42.171.244 1 FULL/DR 00:00:31 10.46.0.244 Vlan46
10.10.0.243 1 FULL/BDR 00:00:39 10.36.0.243 Vlan36
Core2#sh ip ospf database
OSPF Router with ID (10.56.0.246) (Process ID 9)
Router Link States (Area 0.0.0.9)
Link ID ADV Router Age Seq# Checksum Link count
9.42.171.243 9.42.171.243 1750 0x80000012 0x00AC14 4
9.42.171.244 9.42.171.244 1567 0x80000017 0x006D2D 4
10.10.0.243 10.10.0.243 1537 0x80000003 0x00491C 4
10.56.0.246 10.56.0.246 1532 0x80000010 0x0023D5 2
Net Link States (Area 0.0.0.9)
Link ID ADV Router Age Seq# Checksum
10.10.0.244 9.42.171.244 1577 0x80000007 0x00405B
10.20.0.244 9.42.171.244 1577 0x80000007 0x00C7C9