Filter
Top Products
Chapter 7. Nortel Networks L2/3 GbESM configuration and network integration 137
10.36.0.246 10.56.0.246 1532 0x80000008 0x00BDD5
10.46.0.244 9.42.171.244 1507 0x80000008 0x00E064
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
0.0.0.0 10.56.0.246 517 0x80000007 0x00D991 9
Complete configuration snapshots
Configurations shown in Example 7-40 and Example 7-41 on page 140 include details for
OSPF and RIP. In general they should not be run at the same time. One configuration for
GbESMs and one for Core switches is shown with notes when the second switch of the same
type has a different configuration.
Example 7-40 Layer 3 GbESM configuration with dynamic routing
>> GbESM_1 - Main# /c/d
script start "Layer 2-3 Gigabit Ethernet Switch Module for IBM eServer BladeCenter" 4
/**** DO NOT EDIT THIS LINE!
/* Configuration dump taken 0:04:01 Thu Jan 1, 2070
/* Version 1.0.1.6, Base MAC address 00:11:f9:36:b7:00
/* GbESM_1
/c/sys
hprompt ena
/c/sys/access/user/uid 1
name "USERID"
pswd "177d191d054908081634f2f6c6f9abfa98b78d75d776b757b047e9f5e089cb8c"
ena
cos admin
/c/sys/ssnmp
name "GbESM_1"
/c/port INT1
pvid 20
/c/port INT2
pvid 10
/c/port INT3
pvid 10
/c/port EXT1
pvid 35
/c/port EXT2
pvid 35
/c/port EXT3
tag ena
pvid 10
/c/port EXT5
pvid 36
/c/port EXT6
pvid 36
/c/l2/vlan 1
def INT1 INT2 INT3 INT4 INT5 INT6 INT7 INT8 INT9 INT10 INT11 INT12 INT13 INT14 EXT4
/c/l2/vlan 10
ena
name "VLAN_Green"
def INT2 INT3 EXT3
/* above excludes INT3 on GbESM2
/c/l2/vlan 20
ena
name "VLAN_Red"
def INT1 INT2 EXT3