Filter
Top Products
Safety notices
Safety notices contain information that is related to using the IBM
®
NetVista thin
client in a safe manner. These notices can be in the form of a danger, caution, or
attention notice.
Danger notices
The following danger notices call attention to situations that are potentially lethal
or extremely hazardous. These notices pertain throughout this book.
DANGER
To prevent a possible electrical shock during an electrical storm, do not
connect or disconnect cables or station protectors for communications lines,
display stations, printers, or telephones. (RSFTD003)
DANGER
To prevent a possible electrical shock from touching two surfaces with
different electrical grounds, use one hand, when possible, to connect or
disconnect signal cables. (RSFTD004)
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage
on metal parts of the system or the products that attach to the system. It is the
customer’s responsibility to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock. (RSFTD201)
DANGER
To prevent a possible electrical shock when installing the system, ensure that
the power cords for all devices are unplugged before installing signal cables.
(RSFTD202)
DANGER
To prevent a possible electrical shock when adding the device to a system,
disconnect all power cords, if possible, from the existing system before
connecting the signal cable to that device. (RSFTD205)
DANGER
To prevent a possible electrical shock, disconnect the power cord from the
electrical outlet before opening the unit. (RSFTD215)
© Copyright IBM Corp. 2000 v