Filter
Top Products
11.5
SafeNet/400 Reference Guide
Copyright 2008 MP Associates of Westchester, Inc.
V8.50 - May 2008
Activating SafeNet/400 Alert Notification
1. From the SafeNet/400 Special Jobs Menu
select Option 7 - Change Alert Notification
Status or use the CHGNOTIFY command and press F4.
2. Type *ON for parameter ALERT to activate alert notification, then ENTER.
3. Enter *YES to receive summarized alerts or *NO for detailed alerts.
4. Enter *YES to receive alerts as e-mail or *NO to receive alerts as workstation messages
only.
Your system must be configured for SMTP before e-mails can be used.
5. Enter the message queue(s) and/or e-mail distribution list(s) that should receive these
alerts. You can send alerts to both message queues and distribution lists.
The alerts are not sent to message queues in *BREAK mode. To receive these alerts
immediately, make sure the user message queue is in *BREAK mode. (See CHGMSGQ
command in the IBM CL Manual
)
6. You can enter individual e-mail addresses to receive alerts in addition to, or instead of,
message queues and distribution lists.
Use the ‘+’ sign to enter additional values.
7. Press ENTER to display the parameter to set the Summarized Alert Interval
If the Summarized Alerts parameter is set to *YES, you can specify the number of
minutes between alerts. You will receive notification when each interval expires,
indicating the number of rejections since the last notification.
Creating a Distribution List
Use the CRTDSTL command to create a distribution lists for SafeNet/400 alerts.