Filter
Top Products
3.2
SafeNet/400 Reference Guide
Copyright 2008 MP Associates of Westchester, Inc.
V8.50 - May 2008
Controlling TELNET Access by IP Address
1. Set the TELNET server to Level 3 using the WRKSRV command.
2. From the SafeNet/400 Main Menu, select Option 7 – Work with TCP/IP Address
Security or use the WRKTCPIPA command and enter *TELNET as the server to
control
3. Enter the IP address in dotted decimal format (i.e., 10.2.2.2)
Use wild card options if desired (10.2.2.x)
4. Enter A or R to accept or reject the request
Restricting Access to Specific Device Names
1. Set the TELNET server to Level 3 using the WRKSRV command
2. Use the WRKTCPIPA command to enter the correct IP address, then enter the
device name to use for this IP address.
You may also use a generic device name by putting an * at the end of the name. If you
use a generic name, up to 99 will be used.
For example:
An entry of AP* would allow devices to be used as AP01 through AP99. The login
process through TELNET will select the next available device name.