Filter
Top Products
3.7
SafeNet/400 Reference Guide
Copyright 2008 MP Associates of Westchester, Inc.
V8.50 - May 2008
Setting up TCP/IP Address Control Table
1. Use SafeNet/400 Main Menu
Option 7 or the WRKTCPIPA command
2. In IP Addresses for Server enter *FTPSERVER, *FTPCLIENT or *TELNET for the
proper control table.
3. Type the addresses to accept or reject. A indicates Accept; R indicates Reject.
Example 1:
Accept/
Address Reject
10.2.2.X A
10.2.2.5 R
In this example any address from 10.2.2.1 through 10.2.2.255 will be accepted, with the
exception of 10.2.2.5, which will be rejected.
Example 2:
Accept/
Address Reject
10.2.2.1XX A
10.2.2.14X R
In this example all clients with addresses from 10.2.2.100 through 199 will be accepted,
with the exception of clients addressed 10.2.2.140 through 10.2.2.149, which will be
rejected.
To print the control table, select Option 6 - Print TCP/IP Address Control Listing on the
SafeNet/400 Reports Menu.