Filter
Top Products
10.4
SafeNet/400 Reference Guide
Copyright 2008 MP Associates of Westchester, Inc.
V8.50 - May 2008
If you are unsure that SafeNet/400 is the source of the problem
1. Reset the Security Level in SafeNet/400 by following these directions:
From the SafeNet/400 Main Menu
select Option 1 – Work with Server Security
Settings or use WRKSRV command
If you know which server function the request is using, change the server’s Security
Level to 1. If you cannot determine which server function the request is attempting to
access, set all the servers to Security Level 1.
Try the client request again
If the request is successful, change the server (or servers) back to the original Security
Level, Logging Level All. This will log all the client requests.
2. Try the client request again.
If the request is successful, run the request log report and review the client request.
If the request is rejected, check PCREVIEW to view the actual transaction.
Make the required authority table changes. Test your changes with the on-line
transaction program.
Try the client request again and review the logs again.