Filter
Top Products
Chapter 19. System x3850 and xSeries 366 237
System x3850 and xSeries 366 memory options
Notes:
1. x3850 and x366 support Chipkill, memory mirroring, memory ProteXion technologies, hot-swap and
hot-add memory.
2. Supported memory DIMMs can coexist in the same server. However, memory DIMMs of the same
capacity must be installed in matched pairs.
3. One memory card comes standard. At least one memory card is required. A total of four memory cards
with four DIMM slots each, may be installed, allowing a total of 16 DIMMs per chassis.
4. This option kit includes the components necessary to upgrade systems that currently have single-core
Intel Xeon MP processors installed to support the dual-core Intel Xeon MP processors. Processors are not
included in the kit and must be purchased separately.
SBB
Number
Option
Number
Feature
Code Memory Description
1, 2
Memory Cards
39R9502 41Y5000 4338 4-DIMM DDR2 MEMORY CARD
3
0001919 41Y5005 1919 Dual Core X3 Upgrade Kit
4
Memory DIMMs
- 73P2866 - 2GB (2x1GB Kit) PC2-3200 CL3 ECC DDR2 SDRAM RDIMM (512Mb)
- 73P2867 - 4GB (2x2GB Kit) PC2-3200 CL3 ECC DDR2 SDRAM RDIMM (512Mb)
30R5147 - 0535 4GB PC2-3200R DDR2 CL3 ECC SDRAM RDIMM
39M5807 - 0552 1GB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
39M5810 - 0553 2GB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
39M5819 - 0554 512MB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
Note: Standard: 1 GB depending on server model, expandable to 32 GB. Type: 333 MHz, registered, ECC, PC3200
double data rate (DDR) II, SDRAM. Connectors: Two-way interleaved, four dual inline memory module
(DIMM) connectors per memory card. Maximum: Four memory cards, each card containing two pairs of single-
ranked PC3200 DDRII DIMMS.
Table 43. Standard Memory Configuration
Model Std. DIMM Configuration
1RY, 2RY, E2Y, E5Y, E6Y 2 x 1GB PC2-3200 CL3 ECC DDR-2 SDRAM RDIMM
E1Y 4 x 1GB PC2-3200 ECC DDR-2 SDRAM RDIMM
E7Y, EAY 8 x 1GB PC2-3200 ECC DDR-2 SDRAM RDIMM