Filter
Top Products
29
Optimizing video images
After your video device is connected properly and the image is on the screen, you
can optimize the image using the onscreen menus. For general information on using
the menus, see page 30.
• Adjust the Keystone, Contrast, Brightness, Color, or Tint (page 31).
• Change the Aspect Ratio. Choose the option that best fits your input source
(page 31).
• Select a Sharpness setting (page 31).
• Adjust the Color Temperature. Select a listed warmth value (page 32).
• Turn on Overscan to remove noise
on the edges of the image (page 32).
Customizing the projector
You can customize the projector for your specific setup and needs. See page 33 to
page 34 for details on these features.
• For rear projection, turn Rear Project on in the Setup menu.
• For ceiling mounted projection, turn Ceiling Mount on in the Setup menu.
• Specify which source the projector checks f
irst for active video during power-
up.
• Specify the function of the Custom key on the remote.
• Turn the projector’s display messages on and off.
• Turn on power saving features.
• Specify appearance of blank screen and startup screen.
• Specify the language v
iewed on the menus.
• Save settings for the active source as a preset.
Dynamic Messaging
Using command codes, text messages can be sent for display by the projector (and
all other InFocus projectors with the Dynamic Messaging feature) over a network or
serial connection. Text is shown on top of whatever else is being displayed, and can
be shown in ticker tape format or in a box, with optional beep tone alert. This is a
great way to display urgent alert messages to employees, and simply requires a
connection to the projector RS-232 serial control or LAN connector. Command
codes for executing Dynamic Messaging are available on our website at
www.infocus.com/support.