Filter
Top Products
33
Setup menu
Language: allows you to select a language for the onscreen display.
Network:
Allows you to setup network settings.
• DHCP: Turns the DHCP on or off.
• IP Address: Assign Network IP Address.
• Sub
net Mask: Assign Network Subnet Mask.
• Default Gateway: Assign Networ
k Default Gateway.
• WINS Host Name Lookup: Turns WINS Host Name Lookup on or off.
• Host Name: Disp
lays the host name.
• MAC Add
ress: Displays network MAC Address value.
• Show Network Messages: Turns network messages on or off. Network
messages display the projector’s IP address (and host name if enabled) when
the projector is also displaying source messages.
• Resta
rt Network...: Restarts the network.
• Network Fact
ory Reset...: Performs factory reset.
LiteBoard™Wa
nd: allows you to control the operation of the LiteBoard Wand.
Note: Enabling LiteBoard disables 3D Control.
Mic Volume: adjusts
the relative volume of the microphone versus audio-in.
Key Click: turns the key click sound on or off. When this setting is on, pressing
keys on the keypad causes the projector’s speaker to play a “click” sound.
Custom Key:
allows you to assign a different function to the Custom button,
allowing you to quickly and easily use the effect. Highlight an effect and press
Select to choose a different one.
• Blank Screen:
displays an empty screen.
•Mute: tu
rns off all sound.
• Aspect Ratio:
toggles among 4:3, 16:9, 16:10, Native, Letterbox and
Panorama options (see page 10 and page 31).
• Source: cycles thr
ough available sources.
• Auto Image:
resets the projector to the source (page 27).
• Freeze Screen: pauses the projected image.
• Sour
ce Info: the default action. Shows the Source Info menu.
• Pr
ojector Info: shows the Projector Info menu.
• Overscan: removes noise around the image.
• AV
Mute: enables or disables AV Mute function.
• Closed Captions: enables or disables Closed Captions.
Blank Key: select what to display when the blank key on the remote is pressed:
your custom snapshot, a solid color screen (blue, black or white), the factory logo
screen, a timer, or test patterns. The timer option is useful for classroom tests or
break times during meetings.
Source Keys: En
ables or disables Source Keys on the optional Commander-2
remote.
AC Power On:
When this feature is on, the projector automatically turns on when
electrical power is connected. This allows control of ceiling mounted projectors
with a wall power switch.
Auto Off Time: automatically turns the projector off after no signals are detected
for a preset number of minutes. If an active signal is received before the projector
powers down, the image will be displayed.
Screen Save Time: aut
omatically blanks the screen with a black color after no
signals are detected for a preset number of minutes. The image returns when an
active source is detected or a remote or keypad button is pressed.
Sleep Timer: Al
lows the projector to automatically power off after it has been on
for a specified amount of time.
Always-On Functions: allows
you to control which projector functions will work
even when the projector is in standby (powered off but connected to AC Power).
Press Up or Down to highlight the function you want to change, then press select or
left and right to change the function to either Yes or No. Press menu when done.
Note that some functions must always have the same value; in this case when you
change one value, other values in the submenu may also change automatically.
Functions which can be adjusted include: 5-Volt DC Output, Mic Input, Monitor
Out, Network and USB Display.
Lamp Low Power: tog
gles between on and off. Turn it on to lower the light output
of the lamp. This also lowers the fan speed, making the projector quieter.
Power Sounds: controls
whether the projector makes a sound when powered on
and off.
Internal Speaker:
turns the internal speaker on or off.
Audio Inputs: assign
an audio input to a specific video/computer source input.
Press up or down to highlight the source you want to change, then press Select or