Filter
Top Products
44
To display your computer/PDA image over the LAN:
1
Turn the projector on, hit the Source button and select LAN. The LiteShow
splash screen should appear within one minute.
2 You must be connected to the projector through a wired or wireless LAN. For
wireless LAN, connect to the wireless network using the same SSID as shown
on the projector.
3 Download and install the LiteShow Utility, if you have not already done so.
4 At the Access Point prompt, select the appropriate wireless connection to the
projector or choose SKIP for a wired LAN connection.
5 Select the projector from the Device Name list.
6 Enter the Login Code, if prompted.
7 Begin presenting.
LiteShow Splash Screen
Access Point prompt Device Name list
Login screen