Filter
Top Products
7
Connecting a computer source
USB Mini B connection
Connect the USB cable to your computer's USB A connector and to the projector's
USB mini B connector.
To display images over USB: If this is the fir
st time you have used the USB
Display feature, an Auto-Play screen will appear within a minute. Click Start USB
Display. (Note: If the Auto-Play screen does not appear, browse to the CD Drive
USB Display on your computer and double-click the DLUSB.Cab file to initiate
manually.)
Within a minute, your computer
image should display
.
To stop displaying your computer
image over the USB cable: Disconnect the
USB cable from the projector and/or laptop or change the selected source on the
projector.
To advance slides in a PowerP
oint presentation using the remote control: Press
the up and down arrow buttons on the remote control to move through your slides.
VGA connection
Connect one end of the provided computer cable to the VGA 1/VGA 2 connector
on the projector and the other to the VGA connector on your computer. If you are
using a desktop computer, you will need to disconnect the monitor cable from the
computer’s video port first.
HDMI 1.3 connection
HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI
provides an interface between sources, such as set-top boxes, DVD players, and
receivers and your projector. Plug an HDMI cable into the video-out connector on
the video device and into the HDMI connector on the projector.
To take advantage of HDMI 1.3 Deep Color (30 bit), you must have a 1.3-
c
o
mpatible source.
Connecting power
Connect the black power cord to the Power connector on the rear of the projector
and to your electrical outlet. The Power light on the Status Indicator Panel (page 16)
turns amber. NOTE: Always use the power
cord that shipped with the projector.
Optional computer connections
To get sound from the projector, connect an audio cable (optional cable, not
included) to your computer and to the Audio 1 connector on the projector. You may
also need an adapter.
To display a presentation using a USB flas
h d
rive, see the Using LitePort (page 37).
This feature displays JPEG images and Presentation-to-Go presentation,
eliminating the need for a computer source.
If you are using a desktop computer and want to see the image o
n your computer
screen as well as on the projection screen, connect the computer’s monitor cable to
the Monitor Out connector on the projector.
USBA
USBmini B
MOLEX
MOLEX
connect USB cable
USBA
USBmini B
connect VGA cable