©2004 Inova Computers GmbHPage 1-6 Doc. PD00941013.001
Product Overview
ICP-CM
*Notes: CPUs fitted with HD, FD or CD-ROM etc. have a max. operational temp. of 50°C.
Rear I/O D necessitates backplanes being PICMG 2.0 Rev. 3.0 compatible
Additional 82551 controller
Universal bridge (Master or Slave)
Ī Serialized interrupts
Ī Universal (3.3/5.0V) V I/O support
Ī 32-bit and Rear I/O
Ī Dual 10/100 Mbit/s Fast Ethernet
Ī 1x front-panel 480Mbit/s, USB 2.0, (1x rear-panel 12Mbit/s, USB 1.1)
Ī VGA (chipset or AGP)
Standard to all CPU variants is option ‘D’:
Ī VGA (chipset or AGP if installed)
Ī Fast Ethernet ETH 1 (Intel 82551)
Ī USB 1.1
Ī PS-2 mouse & keyboard
Ī 2
nd
IDE channel (Master & Slave)
Ī Software configurable
Ī LPT1 or
Ī COM1 & COM2 or
Ī Floppy disk (A or B - BIOS selectable)
Ī Reset & Beeper
1.44MByte 3.5” floppy drive and EIDE (standard 40-pin header - 80-strand
ATA-5 compatible) supporting 2 pairs (Master/Slave) hard-disks or CD ROMs
8HP front-panel with 2x USB 2.0, COM1, COM2, combined PS-2 mouse &
keyboard; 12HP panel has LPT
USB (USB), 2x RJ45 (Ethernet), 9/15-pin D-Sub (Graphic piggyback) or 15-pin
high-density D-Sub (VGA)
Ī Universal (transparent/non-transparent) PCI/PCI bridge for Master/Slave
operation
Ī PICMG 2.0 R3.0, 32/64-bit, 33MHz system slot interface with 7 Master
(DMA) support.
Ī Full Hot-Swap according to PICMG2.1 R2.0
3U (100 x 160mm) x 21/42mm (4TE/8TE)
Typ. 15W
Windows
®
XP, Windows
®
2000, Windows
®
NT, Windows
®
9x, Linux, VxWorks
®
,
QNX
®
, OS9
220g (4TE)
>220,000 hours @ 20°C
0°C to +65°C (Std.) -40°C to +85°C (Opt.)
Passive cooling requires - refer to Table 1.51 for details
-40°C to +85°C
5% to 95% (non-condensing)
Three-year limited warranty
PICMG 2.0 R3.0; CE
Fast Ethernet
PCI/PCI
On-Board I/O
Rear I/O
Mass Storage
Front-Panels
Connectors
CompactPCI
Mechanics
Power Cons.
Software Sup-
port
Mass
MTBF
Oper. Temp.
Storage Temp.
Humidity
Warranty
Conformance