Filter
Top Products
©2004 Inova Computers GmbH
Page B-4 ICP-P4/PM/CM Appendix-B
IPB-FPE12
Appendix B
B1.4 LPT1 Interface
The physical LPT1 interface is either integrated into a 12HP CPU front-panel or available as a
separate 4HP unit. The piggyback located behind this interface connects to the hard-disk carrier
board (ICP-HD-3) mounted J13 connector.
Figure B1.4 LPT1 Interface Pinout
Table B1.4 LPT1 Connector Signals
Table B1.3 IPB-FPE12 Connector Description
Connector Description
J13 LPT1
113
1425
Pin No. Signal Pin No. Signal
1 STROBE 2 PD0
3 PD1 4 PD2
5 PD3 6 PD4
7 PD5 8 PD6
9 PD7 10 ACK
11 BUSY 12 PE
13 SLCT 14 AUTOFD
15 ERROR 16 INIT
17 SLCTIN 18-25 GND