Filter
Top Products
©2004 Inova Computers GmbHPage C-12 ICP-P4/PM/CM Appendix-C
ITM-RIO
Appendix C
C1.10 EIDE Interface
Standard to all rear I/O transition modules is the 3.5” EIDE hard-disk header. This has a standard
(commercial PC) pinout and requires no further mention here.
Note:
To conform with the ATA 5 standard,
only suitable, commercially available
80-strand ribbon cable should be
used. Failure to do so may result in
data transmission errors or even cause
the CPU to crash!
C1.11 Slim-Line Floppy Disk Interface
Standard to all rear I/O transition modules is the slim-line floppy disk header. This has a standard
(commercial PC) pinout and requires no further mention here.