Filter
Top Products
©2004 Inova Computers GmbHPage 1-14 Doc. PD00941013.001
Product Overview
ICP-CM
Figure 1.44 Front-Panel Options
The front-panels shown in Figure 1.44 show the tremendous flexibility built into Inova’s CPU
concept. From left, the standard CPU is 4TE with dual Fast Ethernet, USB (2.0) and VGA graphic
connections. If, instead of VGA graphics, PanelLink or GigaST
Ȣ
R is required then an AGP piggy-
back is installed on J4 for this purpose. TFT graphics are realised in a similar way except the front-
panel will be cut away (to the right of the VGA connector) to permit passage of the flat-band
ribbon cables.
If the application requires a PS/2 mouse, PS/2 keyboard, floppy, COM or LPT ports or if the CPU is
equipped with a hard disk, IDE FLASH or an adapter that accesses other devices attached to this
primary IDE channel, then an 8TE front-panel is selected. Both COM ports (jumper selectable to
be RS232 or RS485) are installed on Inova’s ICP-HD-3 carrier board as are the interfaces for the LPT
and slim-line FD.
The LPT interface is available on a dedicated panel shown to the right of Figure 1.44.