Filter
Top Products
Chapter 3. Installing and Using the RAID Array 410 Manager for Windows NT
EK–SMRAC–IG. C01 3–7
Figure 3–5 Updated Physical View
3.6.2 Practice Example: Creating a Single Disk
Click on the Configure button near the top of the main window. Doing so displays three
configuration buttons in the right side of the window:
Create, Modify, and CLI.
To create a single disk, perform the following steps:
1. Click on the
Create button.
The
Create button opens and displays the Create window (see Figure 3–5). Use the
Create window to select from the following choices:
SPARE, RAID 0 - Stripeset,
RAID 1 - Mirrorset, RAID 5/3 - Raidset, RAID 0+1, and Single Disk - JBOD.
CAUTION
EISA (SWIA3-BB) limitation:
If you are using an EISA SWIA3-BB (Adaptec 2744W) host system
adapter, you are limited to four target Ids and only LUN0 per target
ID. Multiple LUNs under a target ID is not supported. A maximum
of four storage sets are allowed with a different target ID for each
storage set.
Figure 3–6 Create Window