Filter
Top Products
35
Web Device Manager
CHAPTER 4
Web Device Manager
Configuring the Switch’s IP Settings
Note: You must select Manual in the IP Assignment Method box before you
can change the IP settings.
1 Click the Configure Device menu and then click IP Settings. The IP
Settings screen appears on the right side of the Web Device Manager
window.
2 To manually configure the IP settings, select Manual in the IP
Assignment Method box. Under Change, type the new IP address,
subnet mask, and default gateway. If you have set up tag-based VLANs
on the switch, you can specify the VID of the VLAN where the switch’s
SNMP management agent will reside.
3 Click Submit.
4 The new IP settings do not take effect until the switch reboots. Do one
of the following:
To have the changes take effect now, click Save and Reboot. Rebooting
the switch temporarily interrupts network connectivity to the switch.
To have the changes take effect later, click Reboot Later.