70
CHAPTER 5
Intel Express 460T Standalone Switch Users Guide
Option 2 - Accept a list of user-defined static MAC addresses
1 In the MAC Learning column, press z until <Disabled>
displays, to disable MAC learning for the ports you are securing.
2 Click Submit.
Then set static MAC addresses that can use the secured port.
1 Press q to move up a level and select the Configure Static MAC
Addresses screen.
2 Click Add.
3 On the Add Static MAC Addresses screen, type a MAC address
allowed to use the secured port.
4 In the Port Number box, select the port you are securing.
5 If port-based or tag-based (IEEE 802.1Q) VLANs are set up on the
switch, the address will be used by a specific VLAN. Type the name or
VID of the VLAN to use the MAC address.
6 Repeat steps 3-5 until you have added all MAC addresses allowed to
use the secured port.
7 Click Submit.
To turn off port security
1 On the Configure Device screen, select Forwarding and Filtering.
2 Select Configure Port Security from this menu.
3 Select the port you want to disable security on. Press the z in the
Learning field until <Enabled> appears, to disable security and allow the
port to learn new MAC addresses.