Filter
Top Products
55
Using Local Management
CHAPTER 5
Local Management
Navigation
The console menus provide a basic interface for configuring switch options.
For navigation tips, see the text below the graphic.
Screen Legend
Use the W Z A S keys or the T and b keys to move between
screen fields.
<Manual> Angle brackets indicate a toggle field. Use the
z to toggle selections within the field. In this
example, the options change between Manual,
BOOTP 10 Mins, BOOTP Continuous, and DHCP.
[255.255.255.0] Brackets indicate an input field.Use the arrow keys to
select the field and then type the required information.
By default, Local Management is in overstrike mode,
which means it replaces existing characters as you
type.
SUBMIT Any word in all caps is a button. Use the T key or
the W Z A S keys to select it and press E to
activate it.
Help at the bottom of the
screen provides informa-
tion about the selected
item.
NOTE
If you are using the Windows*
2000 operating system, the arrow
keys and F1 key do not work. Use
the T and b keys to move
from field to field on the screen.