Filter
Top Products
83
Using Local Management
CHAPTER 5
Local Management
Reset and Console Options
Description
Reset options
Reboot switch: Resets the switch. If you changed the IP configuration
or login setting, the new settings take effect after you select this option.
Reset switch settings to factory defaults: Clears any IP address or
current changes and resets the switch back to its factory defaults. All
counters are cleared and the switch starts sending BOOTP requests.
Serial Port Settings
Port Setting: Configures the switch’s serial port for out-of-band (SLIP)
management. Press the z to toggle the field from <Console> to
<SLIP>. Settings take effect on the next reboot.
Console Timeout: Log a user out after a period of inactivity. Settings are
from 0-90 minutes in 15-minute increments. A setting of <0 mins> means
no timeout. The default is 60 minutes.
LOCATION
Main Menu
Configure Management
Reset and Console Options