Filter
Top Products
12
3.8 VGA Controller
The HS-2601A has an onboard jumper that selects the working voltage
of the flat panel connected to the system. Jumper JP2 offers two
voltage settings for the user.
JP2: Panel Voltage Select
Options Settings
5.0 V (default) Short 1-2
3.3 V Short 2-3
123
WARNING: Please contact the supplier of your panel and make sure of
the correct voltage it uses. Incorrect settings on JP8 may
cause internal damage to your panel.
The built-in C&T 69000 CRT/Panel display controller, onboard
HS-2601A, uses 2MB memory to support resolutions up to
1280x1024x256 colors.
The HS-2601A provides two connection methods of a VGA device.
CN20 offers a single standard CRT connector (DB15) while CN16 is
the 50-pin panel connector onboard reserved for flat panel installation.
CN6: 15-pin CRT Connector (DB15)
PIN Description PIN Description
1 Red 2 Green
3
Blue
4
N/C
5 GND 6 GND
7 GND 8 GND
9 N/C 10 GND
11 N/C 12 GND
13 HSYNC 14 VSYNC
15 GND
1
6
10
11
5
15