45
MODEM Use IRQ:
This item determines the IRQ in which the MODEM can be used.
The available choices are 3, 4, 5, 7, 9, 10, 11, NA.
4.7.1 PM Timers
The following four modes are Green PC power saving functions that
are only user configurable when User Defined Power Management has
been selected. See above for available selections.
Doze Mode:
When enabled and after the set time of system inactivity, the CPU
clock will run at slower speed while all other devices still operate at
full speed.
Standby Mode:
When enabled and after the set time of system inactivity, the fixed
disk drive and the video would be shut off while all other devices
still operate at full speed.
Suspend Mode:
When enabled and after the set time of system inactivity, all
devices except the CPU will be shut off.
HDD Power Down:
When enabled and after the set time of system inactivity, the hard
disk drive will be powered down while all other devices remain
active.
Throttle Duty Cycle:
When the system enters Doze mode, the CPU clock runs only part
of the time. You may select the percent of time that the clock runs.
The available choices are 12.5%, 25.0%, 37.5%, 50.0%, 62.5%,
and 75.0%
PCI/VGA Act-Monitor:
When Enabled, any video activity restarts the global timer for
Standby mode. The available choices are Enabled, Disabled.
Soft-Off by PWR-BTTN:
When Enabled, turning the system off with the on/off button
places the system in a very low-power-usage state, with only
enough circuitry receiving power to detect power button activity or
Resume by Ring activity. The available choices are Instant-Off,
Delay 4 Sec.
CPUFAN Off in Suspend:
When Enabled, the CPU fan turns off during Suspend
mode.