Filter
Top Products
52
IR Transmission delay:
Full duplex mode permits simultaneous bi-directional
transmission. Half duplex mode permits transmission in one
direction only at a time. Select Disabled if there is no infrared port
present.
Onboard Parallel Port:
Select a logical LPT port name and matching address for the
physical parallel (printer) port. The available choices are
378H/IRQ7, 278H/IRQ5, 3BCH/IRQ7, Disabled.
Parallel Port Mode:
Select an operating mode for the onboard parallel port. Select
Compatible or Extended unless you are certain both your
hardware and software support EPP or ECP mode. The available
choices are SPP, ECP+EPP1.7, EPP1.7+SPP, EPP1.9+SPP,
ECP, ECP+EPP1.9, and Normal.
ECP Mode Use DMA:
Select a DMA channel for the port. The available choices are 3, 1.
EPP Mode Select:
This item allows you to determine the IR transfer mode of onboard
I/O chip. The available choices are EPP1.9, EPP1.7.
LCD Panel Type:
This option allows you to select the panel display type and
resolution installed on your system.
Panel# Panel Type
0 1024*768 Dual Scan STN Color Panel
1
128*1024 TFT Color Panel
2 640*480 Dual Scan STN Color Panel
3 800*600 Dual Scan STN Color Panel
4 640*480 Sharp TFT Color Panel
5 640*480 18-bit TFT Color Panel
6
1024*768 TFT Color Panel
7 800*600 TFT Color Panel
8 800*600 TFT Color Panel (Large BIOS ONLY)
9
800*600 TFT Color Panel (Large BIOS ONLY)
10 800*600 Dual Scan STN Color Panel (Large BIOS ONLY)
11
800*600 Dual Scan STN Color Panel (Large BIOS ONLY)
12 1024*768 TFT Color Panel (Large BIOS ONLY)
13 1280*1024 Dual Scan STN Color Panel (Large BIOS ONLY)
14
1024*600 Dual Scan STN Color Panel (Lange BIOS ONLY)
15 1024*600 TFT Color Panel (Lange BIOS ONLY)