Filter
Top Products
Configuration Software and Utilities 79
Table 24. Primary/Secondary/SATA-0/SATA-1 Master/Slave Submenus (continued)
Feature Options Description
S.M.A.R.T
• Auto (default)
• Disabled
• Enabled
This option can be changed only if User is selected as
the type. If Auto is selected, this option is not displayed.
Enables or disables Self-monitoring, Analysis, and
Reporting Technology.
Cable Detected
(Note)
No options Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor
(for ATA-66/100 devices).
Note: These configuration options appear only if an IDE device is installed.
Floppy Configuration Submenu
To access this menu, select Advanced on the menu bar, then Floppy Configuration.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
Drive Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Fan Control Configuration
Hardware Monitoring
Remote Access Configuration
The submenu represented by Table 25 is used for configuring the diskette drive.
Table 25. Floppy Configuration Submenu
Feature Options Description
Diskette Controller
• Disabled
• Enabled (default)
Disables or enables the integrated diskette
controller.
Floppy A
• Disabled
• 360 KB 5¼ inch
• 1.2 MB 5¼ inch
• 720 KB 3½ inch
• 1.44 MB 3½ inch (default)
• 2.88 MB 3½ inch
Specifies the capacity and physical size of
diskette drive A.
Diskette Write-Protect
• Disabled (default)
• Enabled
Disables or enables write-protect for the
diskette drive.