Filter
Top Products
84 Intel Server Board S875WP1-E Product Guide
Table 29. Chipset Configuration Submenu (continued)
Extended Configuration
• Default (default)
• User Defined
SDRAM Frequency
• Auto (default)
• 266
• 333
• 400
This option is available only if User Defined is
selected as the Extended Configuration option. It
allows the user to override the detected memory
frequency value.
SDRAM Timing Control
• Auto (default)
• Manual –
Aggressive
• Manual – User
Defined
This option is available only if User Defined is
selected as the Extended Configuration option.
Auto: Timings are programmed according to the
memory detected.
Manual – Aggressive: Selects the most aggressive
user-defined timings.
Manual – User Defined: Allows manual override of
detected SDRAM settings.
CPC Override
• Auto (default)
• Enable
• Disable
Command Per Clock. When enabled, it allows the
DRAM controller to attempt chip select assertions in
two consecutive common clocks.
SDRAM RAS Act. To Pre. No options
SDRAM CAS# Latency No options
SDRAM RAS# to CAS delay No options
SDRAM RAS# Precharge No options