Filter
Top Products
Description 19
Using Passwords
If only the supervisor password is set, you:
• Must enter the supervisor password to enter BIOS Setup.
• Must enter the supervisor password to boot the server if Password on Boot is enabled in the
BIOS Setup.
• Must enter the supervisor password to exit secure mode.
If both passwords are set, you:
• May enter the user password to enter BIOS Setup. However, you will not be able to change
many of the options.
• Must enter the supervisor password if you want to enter BIOS Setup and have access to all of
the options.
• May enter either password to boot the server if Password on Boot is enabled in the BIOS Setup.
• May enter either password to exit secure mode.
Password Clear Jumper
If the user or supervisor password(s) is(are) lost or forgotten, moving the password clear jumper
into the “clear” position clears both passwords. The password clear jumper must be restored to its
original position before a new password(s) can be set. The password clear jumper is located on
jumper block J106 pins [3-4] on the Server Board SE7500CW2.