Filter
Top Products
38 Intel Server Board SE7500CW2 Product Guide
Power Menu
To access this menu, select Power on the menu bar at the top of the screen.
Main Advanced Security
Power
Boot System Exit
Table 19 lists the options available on the Power menu. This menu is designed to disable ACPI
automatic reboot in the S0 or S4 states. If these submenus are enabled and AC power is lost, the
server power and its operating system will remain off.
Table 19. Power Menu
Feature Choices Description
Power Loss Control
• Stay Off
• Last State
(default)
Specifies the power level the system returns to after AC power
is lost.
Stay Off leaves the server power disabled and ACPI does not
function to reboot the server in the event of a power failure.
Last State reboots the system according to ACPI standards.
Power Button
• Disable
• Enable
(default)
Enables or disables the power button functionality.
Boot Menu
To access this menu, select Boot on the menu bar at the top of the screen.
Main Advanced Security Power
Boot
System Exit
Table 20 lists the options available on the Boot menu. This menu allows you to set the boot priority
of devices installed in the system. Use the following key combinations to navigate between or view
the devices and change the boot priority:
• <Enter> expands or collapses devices with a “+” or “-.”
• <Ctrl+Enter> expands all devices.
• <Shift+1> enables or disables devices.
• <+> and <-> moves the device up or down.
• <n> may move the removable device between the hard drive or removable disk.
• <d> removes a device that is not installed.