Filter
Top Products
Server Board Installation 55
Installing Memory
The server board supports only DDR 200/266 compliant DIMMs. Install from 256 MB to 4 GB of
memory, using up to four DIMMs.
DIMMs must be installed in pairs. The furthest DIMM pair from the MCH must be populated first.
No DIMM mixing is allowed within a bank. Between banks only the DIMM size may be different.
All DIMMs must be the same speed and architecture. For a list of supported memory, visit the Intel
Support Web site:
http://support.intel.com/support/motherboards/server/SE7500CW2
OM14194
DIMM Memory Connector 2B
DIMM Memory Connector 3B
DIMM Memory Connector 3A
DIMM Memory Connector 2A
USB
Main Power
Aux. Pwr
DIMM 1A
DIMM 1B
DIMM 2A
DIMM 2B
Figure 10. Installing Memory