Filter
Top Products
28 Intel Server Board SE7500CW2 Product Guide
Table 9. Advanced Menu (continued)
Feature Choices Description
Boot-time Diagnostic
Screen
• Enabled
• Disabled
(default)
Enables or disables the boot-time diagnostic screen.
Disabled will display the splash screen over the diagnostic
screen. This splash screen can be changed to show an
OEM-based logo.
Reset Configuration Data • No (default)
• Yes
Specifies if the extended server configuration data will be
reset during the next boot.
Yes clears the extended server configuration data during
the next boot. The system automatically resets this field to
No during the next boot.
Large Disk Access Mode • Other
• DOS (default)
UNIX
†
, NetWare
†
, and other operating systems require this
option be set to Other. If you install an operating system
and the hard drive fails to install, change this setting and try
again. Different operating systems require different
representations of drive geometries.
PS/2 Mouse • Disabled
• Enabled
• Auto Detect
(default)
Configures the PS/2 mouse.
Disabled prevents any installed PS/2 mouse from
functioning but frees up IRQ 12.
Enabled forces the PS/2 mouse port to be enabled even if
a mouse is not present.
Auto Detect will enable the PS/2 mouse only if one is
present.
Summary Screen • Disabled
• Enabled
(default)
Enables or disables the boot-time hardware/BIOS summary
screen.
Legacy USB Support • Disabled
• Enabled
(default)
Enables support for legacy USB. It may be necessary to
set this option to Disable to install NetWare 6.0 SP1.
PXE Support • Disabled
(default)
• NIC2
• NIC1
Enables support for onboard PXE.
Hyper-Threading • Disabled
• Enabled
(default)
Allows Intel Xeon processors to run in hyperthreading
mode. Enabling this setting will improve throughput
significantly on certain applications.