Filter
Top Products
Chapter 2 — Configuring the PB50
18 PB50 Mobile Label and Receipt Printer User’s Guide
Configuring the PB50
You can change the configuration settings of the PB50 printer directly
from the display, by sending commands from your PC, by using the
web pages, or remotely from the SmartSystems console.
For more information on the IPL and Fingerprint menu systems,
see
“IPL and Fingerprint Setup Menus” on page 57.
Understanding the Display Modes
The PB50 has six display modes to help you effectively interact with
the printer: Ready, Information, Paused, Setup, Error, and Test. Use
the following sections to understand the different printer modes.
Understanding Ready Mode
The printer is in Ready mode when the printer is on and ready to
print. The main screen displays the power status, the radio status, and
the printer language and version.
The PB50 in Ready Mode
Understanding Information Mode
When the printer is in Information mode, it displays a subset of
network information about the printer. If the printer experienced an
error, the error message displays first followed by the printer
information. Each message displays on the screen for five seconds.
After five seconds on the last information screen, the printer exits
Information mode.
The PB50 in Information Mode
SETUP:
SER-COM
IPL 11.2.0
SETUP:
SER-COM
I/O serial 5
8N1 9600
X