Filter
Top Products
Chapter 2 — Configuring the PB50
PB50 Mobile Label and Receipt Printer User’s Guide 31
Use the following sections to set most of your wireless
communication settings. For help with additional commands and
information, see either the Fingerprint Command Reference Manual (P/N
937-005-xxx) or the IPL Command Reference Manual (P/N 937-007-xxx).
You can download both documents from the Intermec web site at
www.intermec.com.
Configuring Wireless Printing Using IPL
Use the following procedures to configure your PB50 with IPL for
wireless printing.
To configure the printer to use WEP authentication
1 Send the following commands to login as an admin and set the
SSID:
<STX><ESC>.x,su -p pass admin<ETX>
<STX><SI>ws,SSID,xxxxx<ETX>
where xxxxx can be from 0 to 32 ASCII characters, not including
the double quote.
2 Send the following commands to configure the WEP keys. The
following example sets WEP key 1 to 1234 and enables WEP key 1.
<STX><SI>ws,WEP1, 0x0001020304<ETX>
<STX><SI>ws,.WEP_KEY,1<ETX>
3 Send the following command to activate the settings.
<STX><SI>ws,ACTIVE,1<ETX>
Weak signal
Poor signal
No signal
Understanding the 802.11 Radio Icons (continued)
Icon Description
Note: The default password for logging in as an admin is “pass.” If
you have changed the password, you will need to use your
password instead of “pass.”