Filter
Top Products
Chapter 2 - Hardware Installation
48
Ethernet Single Channel AUI/10BaseT Daughter Card
COMPONENT SIDE
Figure 2-6. Ethernet Single Channel AUI/10BaseT Daughter Card
NOTE: LED3 is located on the solder side of the daughter card and is not shown in this illustration.
The Ethernet Single Channel AUI/10BaseT Daughter Card provides two types of connectors (DB15 & RJ45)
as shown in Figure 2-7 above. However, only one connection (either AUI or 10BaseT) can be used at a time.
Table 2-16. Ethernet Single Channel Daughter Card LEDs
DESIGNATOR FUNCTION DESCRIPTION
LED1 10BaseT Link When illuminated, indicates that 10BaseT
link has been established.
LED3 +12 Volts When illuminated, indicates that +12 Volts
for the AUI connection is present.
P6
P5
R
J
4
5
D
B
1
5
P4
F1
LED 1